Corrosion has caused great damage to the national economic development, human life and social environment. Most long-distance pipelines are buried underground. Due to the moisture, air, water-soluble mineral salts, acids and alkalis in the soil, metal pipelines will be corroded and damaged. Therefore, people use sacrificial anode cathodic protection for corrosion protection. The application of cathodic protection in my country began in 1958. By the 1960s, cathodic protection had been widely used in oil pipelines. So far, cathodic protection has been applied to almost all oil and gas pipelines, storage tanks, and marine structures.
The principle of sacrificial anode cathodic protection is to use the potential difference of different metals to provide electrons for the protected metal, so that the protected metal is in a state of excess electrons as a whole, and the potential of each point on the metal surface is reduced to the same negative potential, so that there is no potential difference between the points on the metal surface, no more electron flow, and metal atoms no longer lose electrons and become ions dissolved in the solution. The purpose of slowing down corrosion is finally achieved. Since the more active metal is corroded in the process of cathodic protection, it is called sacrificial anode cathodic protection. This method is simple and easy to use, does not require an external power supply, and rarely produces corrosion interference. It is widely used to protect small metal structures or those in low soil resistivity environments.
Common sacrificial anodes include magnesium anodes, aluminum anodes, and zinc anodes. Magnesium is a commonly used sacrificial anode material in electrochemical cathodic protection projects. It has high chemical activity, its electrode potential is relatively negative, and its driving voltage is high. At the same time, it is difficult to form an effective protective film on the surface of magnesium. Therefore, in water media, the microscopic corrosion cell driving force on the surface of magnesium is large, the protective film is easy to dissolve, and the self-corrosion of magnesium is very strong. It is suitable for the protection of metal components in soil and fresh water with high resistivity. It is composed of pure magnesium and magnesium alloys. It has the characteristics of high driving voltage, low current efficiency, and high cost.
There are many types of zinc anodes, and zinc anodes of different shapes can be provided according to customer requirements, such as rectangular, square, bracelet, and various other special shapes. Zinc sacrificial anodes have a low self-corrosion rate, high current efficiency, long service life, and the characteristic of automatically adjusting current. The cathodic protection of zinc anodes is to connect a metal or alloy that is more likely to lose electrons to the protected steel equipment. It is a relatively active metal. When electrochemical corrosion occurs, the metal that is more active than iron is corroded, while iron is protected. Usually, a certain number of zinc blocks are installed at the stern of the ship and below the waterline of the hull to prevent corrosion of the hull.
The most widely used anode is the aluminum alloy anode, which has the characteristics of large capacity, long life, easy installation and simple manufacturing process. Most of them are used for cathodic protection of metal structures in seawater environments or bottom plates of crude oil storage tanks, and cannot be used in soil environments with low chloride ion content. Aluminum anodes can be directly fixed on the protected structure without fillers.
The development of China's anti-corrosion material industry in China has become increasingly mature. With the improvement of industry and national standards, cathodic protection technology and actual performance have been increasingly valued by investors in large-scale projects of long-distance pipelines and oil storage tanks. The projects invested in the past have indeed achieved good results through several years of testing and evaluation.
