News

Precautions For Using Magnesium Alloy Sacrificial Anodes in Water

Oct 18, 2024 Leave a message

Magnesium alloy sacrificial anodes are a protective device used to prevent metal structures from being corroded by electricity. They are metal consumables and can work in water. When using underwater magnesium alloy sacrificial anodes, regular measurements and inspections are required to detect the anode output current values ​​at each point, usually once every three months. The magnesium alloy sacrificial anodes that connect cables to underwater structural metals also need to be inspected regularly to avoid corrosion damage caused by the natural environment in the water. When it is found that the protective potential of the structure against water does not meet the requirements, the magnesium alloy sacrificial anode needs to be replaced in time. If it still does not meet the working requirements, other materials should be considered for replacement.

The smelting technology of magnesium anodes is directly related to the quality of magnesium anodes. The quality of raw materials, the solvents used, the smelting methods, and the equipment used will all affect the quality of the materials. When smelting magnesium alloy sacrificial anodes, the charge must be dry, free of oil, oxides, rust and other pollution, and must not be mixed with dissimilar metals. Solvents have two effects, masking and refining effects.

Magnesium is a relatively active element and will be oxidized during the smelting process. When magnesium is burned, a layer of magnesium oxide film will be formed on the surface. Magnesium oxide is a heat-insulating material, loose and porous. When magnesium is burned, most of the heat is released. Due to the heat-insulating effect of magnesium oxide, it is difficult for the heat to dissipate, and the cold air from the outside cannot enter, forming a vicious cycle, causing the surface temperature to rise sharply, and the oxidation of the magnesium solution becomes more and more serious. During the smelting process of magnesium alloy sacrificial anode, appropriate methods should be used to isolate the magnesium melt from the air.

Send Inquiry