News

Five Advantages Of Sacrificial Anodizing Of Aluminum Alloys

Oct 17, 2024 Leave a message

1. As the base layer for painting and electroplating: Because the oxide film layer has porosity and good adsorption capacity, it has good bonding with the paint film and oxide film, and can be used as the base layer for painting. The film layer of aluminum phosphate anodizing can be used as the base layer for electroplating on aluminum.

2. Prevent corrosion of products: Because the film layer obtained by aluminum anodizing has been properly sealed, it has good stability in the atmosphere. Whether it is an aluminum anodizing film obtained from sulfuric acid solution, oxalic acid solution or chromic acid solution in the normal process, its corrosion resistance is very good.

3. Protection and decoration: On the oxide film with high transparency, the oxide film has the characteristics of being able to absorb a variety of dyes or inorganic pigments, and a variety of bright and bright colors and patterns can be obtained on the oxide film. In addition, the emergence of many new processes in recent years, such as one-time oxidation and multiple coloring, fireworks patterns, wood grain patterns, oxidation offset transfer printing, porcelain oxidation, etc., makes the appearance of aluminum more beautiful and pleasing to the eye. This layer of color film is both a decorative layer and an anti-corrosion layer, such as lighters, gold pens and crafts.

4. As a hard wear-resistant layer: In sulfuric acid or oxalic acid solution, a thick and hard film layer can be obtained by adjusting the process conditions of anodizing. The selected oil can be stored by using the pores and absorption properties of the film layer, which can be effectively applied to working conditions under friction. At the same time, it has the characteristics of lubrication and wear resistance, such as engine cylinders and pistons of automobiles and tractors.

5. As an electrical insulating layer: The aluminum anodized film layer has the characteristics of high resistance, and the thickness of the film layer is proportional to the resistance. This feature has certain practical significance as electrical insulation. It can be used as a dielectric of capacitors, and aluminum oxide skin can also be used as the outer sheath of cables. It is more popular abroad as an insulating layer on its surface to replace rubber sheaths and plastic sheaths. When the film thickness is 27.5μm, its breakdown voltage is 441V. If phenolic resin is used as the film hole filling, its breakdown voltage can reach 2 times. In oxalic acid solution, when the film thickness increases, an insulating layer with a resistance of 200Ω and a breakdown voltage of 980V can be obtained. Of course, this feature can be used for other electrical appliances in addition to wires.

Send Inquiry