Products
Extruded Magnesium Anode Rod

Extruded Magnesium Anode Rod

The extruded magnesium anode rod is selected by large water heater manufacturers in the United States, Australia and China, Material is mainly AZ31B and AZ31D in the American standard ASTM B843 and the Australian standard AS2239, AZ31D has lower iron content and lower impurity content than AZ31B.

Extruded Magnesium Anode Rod

 

The extruded magnesium anode rod is selected by large water heater manufacturers in the United States, Australia and China, Material is mainly AZ31B and AZ31D in the American standard ASTM B843 and the Australian standard AS2239, AZ31D has lower iron content and lower impurity content than AZ31B. Through extrusion molding, the grain is smaller, and the steel core can be penetrated through the entire anode, so that the anode rod has better conduction, support and corrosion uniformity.

The extrusion anode is generally installed at the bottom of the water tank through the nut, which is shared with the sewage outlet, with a diameter of 18-33.4mm and a length of 170-1500mm.

image001
image003
image005
image007

 

Chemical Composition (ASTM B843, AS2239)

 

Alloy

Al

Zn

Mn

Si (max)

Cu (max)

Ni (max)

Fe (max)

Total of Impurities (max)

Mg

AZ31B

2.5-3.5

0.6-1.4

0.2-1.0

0.10

0.05

0.005

0.005

0.30

Bal.

AZ31D

2.5-3.5

0.6-1.4

0.2-1.0

0.05

0.04

0.001

0.002

0.3

Bal.

M2

2.5-3.5

0.7-1.3

0.2-1.5

0.05

0.006

0.001

0.003

0.3

Bal.

 

Electrochemical Performance

 

Open voltage (-V)

Closed voltage (-V)

Actual  capacity (A.h/kg)

Efficiency (%)

1.57-1.67

1.47-1.57

1,230 min

55 min

 

Product Size

 

image009

Anode Dia (mm)

Core Dia (mm)

Thread

Unit Weight (g/cm)

Length (mm)

13.97

2.0

NPT

BSP

G

R

2.83

175-400

19.05 (0.75")

3.0

5.66

200-995

21.34 (0.884)

3.4

6.85

200-1350

22.86

3.4

7.31

200-1500

26.67

3.4

10.42

33.4

4.8

16.08

39.65

4.8

23.07

 

Our main steel core materials are SS400, SUS304, SUS316.

The material of nuts we mainly have AISI 1008, SS400, SUS304, SUS316, brass, galvanized nuts, nickelplated nuts, boiled nuts and 3" threaded sleeve, 5" threaded sleeve. Thread size is 1/2-14NPT, 3/4-14NPT, 3/4BSP, 1NPT and so on.

The nut and steel core are welded together by gas shielded welding without dew.

It is recommended to check and replace once every 2-3 years, and flexible anodes can be used for replacement if the length exceeds 900mm.

image010

 

Hot Tags: extruded magnesium anode rod, China extruded magnesium anode rod, Extruded Aluminum Anode Rod, Flexible Magnesium Anode Rod, Resistor Magnesium Anode Rod, Solar Magnesium Anode Rod, Intelligent Magnesium Anode Rod, Casting Magnesium Anode Rod

Send Inquiry